Heat Shield Reflective aluminum fiberglass Sleeve for Cable Protection & Wire Safety
Management Sleeving
This aluminum-coated fiberglass reflect sleeve is manufactured from aluminum foil laminated with braided fiberglass, ensuring that
the unit is capable of reflecting at least 90% of all radiant heat. This is the ideal reflect sleeve to use for the protection of industrial
wires, cables, hydraulic hoses as well as piping and tubing from aggressive radiant heat sources such as infrared heaters, liquid
metal pour steam and glowing steel slab.
Datasheet
| Part No. |
ID/mm |
Thickness/mm |
Pacakge |
| QX-HDAF-S-09 |
9.0 mm |
1.2mm |
≤10m/roll |
| QX-HDAF-S-14 |
14.0mm |
1.2mm |
≤10m/roll |
| QX-HDAF-S-20 |
20.0mm |
1.4mm |
≤10m/roll |
| QX-HDAF-S-35 |
35.0mm |
1.5mm |
≤10m/roll |
| QX-HDAF-S-40 |
40.0mm |
1.8mm |
≤10m/roll |
| QX-HDAF-S-50 |
50.0mm |
1.8mm |
≤10m/roll |
| QX-HDAF-S-55 |
55.0mm |
2.0mm |
≤10m/roll |
| QX-HDAF-S-70 |
70.0mm |
2.0mm |
≤10m/roll |
| QX-HDAF-S-75 |
75.0mm |
2.2mm |
≤10m/roll |
| QX-HDAF-S-90 |
90.0mm |
2.2mm |
≤10m/roll |
Application
Widely used in construction, electrical, chemical, shipbuilding, aviation, textile, metallurgy, food and other industries. Used
for the protection of ventilation, dust removal, smoke exhaust, gas transmission pipes and lines.
Extended Product
Aluminum fiberglass Sleeve with Hook & loop
The
Aluminum fiberglass Sleeve with Hook & loop is cut from aluminum fiberglass cloth to a certain width and sew on Hook & loop.
It has good light and heat radiation performance. The design of the hook & loop is simple and fast to install and remove. Aluminum
fiberglass sleeve can provide excellent heat protection for wires, cables, hoses, etc. in high temperature environments such as
automobiles, industries, ships, high temperature metal plates, molten metal or glass, open flames and engine exhaust equipment.
Customers' Review
Company information
Audited Supplier 
){kind=link}
){kind=link}