Heat Reflective Insulated Heat Sleeve with Aluminum Electrical Wire Heat Shield
Sleeve Hook and Loop
The aluminum fiberglass sleeve with hook and loop is cut from aluminum fiberglass cloth to a certain and with hook and loop.
It has good light and heat radiation performance.
The design of the hook and loop is simple and fast to install and remove.
Aluminum fiberglass sleeve can provide excellent heat protection for wires,cables etc.In high temperature environments such as automobiles,industries,ships,high temperature metal plates,molten metal or glass,open flames and engine exhaust equipment.
Aluminum Coated Fiberglass Heat Reflective Sleeve is a fabric sewn aluminized fiberglass sleeve, a highly polished aluminum
foil is calendared under high pressure and with an adhesive onto a high temperature fiberglass base fabric. That fabric is slit into
an tape, which is then sewn into a sleeve.
Part No. |
ID/mm |
Thickness/mm |
Width(mm) |
QX-HD-AF-08 |
8 |
0.5 |
≤1 |
QX-HD-AF-13 |
13 |
0.5 |
≤1 |
QX-HD-AF-14 |
19 |
0.6 |
≤1 |
QX-HD-AF-19 |
20 |
0.6 |
≤1 |
QX-HD-AF-20 |
23 |
0.7 |
≤1 |
QX-HD-AF-25 |
25 |
0.7 |
≤1 |
QX-HD-AF-26 |
26 |
0.8 |
≤1 |
QX-HD-AF-32 |
32 |
0.8 |
≤1 |
QX-HD-AF-33 |
33 |
0.9 |
≤1 |
QX-HD-AF-40 |
40 |
0.9 |
≤1 |
Widely used in construction, electrical, chemical, shipbuilding, aviation, textile, metallurgy, food and other industries. Used
for the protection of ventilation, dust removal, smoke exhaust, gas transmission pipes and lines.